NCR 7167 Owner's Manual page 183

7167 Owner's Manual
Flash Memory Status (n = 4 or n = 52)
Bit
0
1
2
3
4
5
6
7
Range of n:
Example:
MSComm1.Output = Chr$(&H1D) & Chr$(&H72) & Chr$(n)
Exceptions:
When n is out of the specified range, the command is ignored.
Send Printer Software Version
ASCII:
Hexadecimal:
Decimal:
The printer returns 8 bytes containing the boot and Flash software version. The first 4
bytes returned are an ASCII string for the boot version. The second 4 bytes are an ASCII
string for the boot version. Example: for 1.234.56(8bytes), the boot version is 1.23 and the
Flash version is 4.56.
Example:
MSComm1.Output = Chr$(&H1F) & Chr$(&H56)
Off/On Hex Decimal
Off 00 0
Off 00 0
Off 00 0
On 04 4
Off 00 0
On 08 8
Off 00 0
Off 00 0
On 20 32
Off 00 0
On 04 64
Off 00 0
1 – 4
49 - 52
US V
1F 56
31 86
Status for Transmit Status
Undefined. Fixed to off.
Undefined. Fixed to off.
User data storage write successful.
User data storage write failed. Specified area
not erased.
Flash logo area adequate. Definition stored.
Flash logo area not adequate for recent
definition.
Not used. Fixed to off.
No thermal user-defined characters written to
Flash
Thermal user-defined characters written to
Flash.
No impact user-defined characters written to
Flash.
Impact user-defined characters written to
Flash.
Not used. Fixed to off.
November 2002
Chapter 6: Commands
161