Check Size; Micr Media Requirements - NCR 7167 Owner's Manual

7167 Owner's Manual

Check Size

The size of the check that the slip station and check flip mechanism handles conforms to
ANSI/ABA standard X9.13 dated 1999.
Personal Check
Business

MICR Media Requirements

MICR Printing
Printing of MICR Characters must conform to MICR standards as defined in ANSI/ABA
X9.13, X9.18 and 9.27 as well ISO 1004.
Forms
Checks must be flat and void of curls, folds or wrinkles expecially at the leading edges of
the checks.
Paper jams and MICR read errors will occur if check have paper clips and staples. Also
damage to the printer mechanism may occur to printer components such as the MICR
read head, paper feed rollers, impact print head, etc..
When inserting the check into the printer and the the printer feed rolls begin to feed the
check release the check immediately. Skewing of the check will occur which will cause
check jams and MICR read errors.
Paper Feed
Direction
6.00" (152.40 mm) wide x 2.750" (69.85 mm) High .
8.75" (222.25 mm) wide x 3.667" (93.14 mm) High
8 .0 mm (0.315 ")
Appendix B: Print Characteristics
6 mm (0.236 ")
Edge of Check
Holes and Low Reflection
Not Permitted in these
areas
November 2002
19 mm (0.747")
224