NCR 7167 Owner's Manual page 118

7167 Owner's Manual
Select Receipt or Slip for Setting Line Spacing
Selects which station receives the effects of the following commands:
1. Select Default Line Spacing (1B 32)
2. Set Line Spacing (1B 33)
3. Add n extra dot rows (16 n)
Example:
This statement selects the slip station for line spacing commands:
MSComm1.Output = Chr$(&H1B) & Chr$(&H63) & Chr$(&H31) & Chr$(&H04)
Exceptions:
This n is out of range this command it's supporting operands are discaraded.
96
ASCII: ESC c 1 n
Hexadecimal: 1B 63 31 n
27 99 49 n
Decimal:
Value of n: 0 Journal selected
1, 2, 3 Select receipt
4 Select Slip
Default of n : 1
November 2002
Chapter 6: Commands