NCR 7167 Owner's Manual page 232

7167 Owner's Manual
FS – Turn underline mode ON/OFF for Kanji
Hexadecimal:
Turn underline mode on or off for Asian character.
All characters could be underlined, including character right side spacing.
Underline can be selected by FS ! and ESC – also, the last received command is effective.
Example:
MSComm1.Output = Chr$(&H1C) & Chr$(&H2D) & Chr$(n)
Define user-defined Kanji characters
Hexadecimal:
210
ASCII: FS - n
1C 2D n
28 45 n
Decimal:
Value of n: 0 = Cancel
1 = 1 dot height underline
2 = 2 dot height underline
Default n: 0 (Cancel)
ASCII: FS 2 c1 c2 d1 ... dn
1C 32 c1 c2 d1 ... dn
28 50 c1 c2 d1 ... dn
Decimal:
Value of c1: Specified the beginning Asian character code
Value of c2: Specified the end Asian character code
Value of d: Image data
November 2002
Chapter 6: Commands