NCR 7167 Owner's Manual page 178

7167 Owner's Manual
The command performs the remote diagnostic function specified by n as described in the
following table.
Value of n
ASC
Space 20
!
"
#
$
%
'
+
/
3
7
Ç
ü
é
â
156
Remote Diagnostic Item
Hex Dec
32 Serial #,
10 digit ASCII
21 33 Serial # ,
10 digit ASCII
22 34 Serial #
23 35 Serial #
24 36 Class/model #,
15 digit ASCII
25 37 Class/model #
27 39 Class/model #
2B 43 Boot firmware part
#, 12 digit ASCII
2F 47 Boot firmware
CRC, 4 digit ASCII
33 51 Flash firmware part
#, 12 digit ASCII
37 55 Flash firmware
CRC, 4 digit ASCII
80 128 Receipt lines tally,
8 digit ASCII
numeric,
max 99,999,999
81 129 Receipt lines tally
82 130 Receipt lines tally
83 131 Receipt lines tally
Function
Write to NVRAM
Example, send 14 bytes to printer: GS I @
0x20 1234567890
Write to NVRAM, and print on receipt to
verify
Example, send 14 bytes to printer: GS I @
! 1234567890
This will print on receipt: Serial # written:
1234567890
Not available, cannot clear Serial # item
Return Serial #, preceded by n to identify
Printer returns 12 bytes in above example:
#1234567890<CR>
Write to NVRAM
Write to NVRAM, and print on receipt to
verify
Return Class/model #, returns 17 bytes
Return Boot firmware part #, returns 14
bytes
Return Boot firmware CRC, returns 6
bytes
Return Flash firmware part #, returns 14
bytes
Return Flash firmware CRC, returns 6
bytes
Write to NVRAM
Example, send 12 bytes to printer: GS I @
Ç00010000
To set receipt lines tally to 10,000
Write to NVRAM, and print on receipt to
verify
Example, send 12 bytes to printer: GS I @
ü00010000
This will print on receipt: Receipt tally
written: 10,000
Clear receipt lines tally to 0
Return receipt lines tally, preceded by n
to identify
Printer returns 10 bytes in above example:
â00010000<CR>
November 2002
Chapter 6: Commands