Green Led Blinking (Slow); Green Led Blinking (Fast) - NCR 7167 Owner's Manual

7167 Owner's Manual

Green LED Blinking (Slow)

Problem
Receipt paper is low*

Green LED Blinking (Fast)

Problem
Receipt paper is out
Receipt cover or front cover is
open
Knife failure
Paper jam in slip station
Paper jam in carriage
Paper jam during flip
What to Do
There are about 4 ½ meters, ± 3 meters, (15
feet, ± 10 feet) of paper left. Change the paper
soon to avoid running out of paper part way
through a transaction.
What to Do
Change the paper now. Do not run a
transaction without paper as the data may be
lost.
Close the cover. The printer will not operate
with either of the covers open.
Open the receipt cover and check the knife.
Clear any jammed paper you can see. Tear off
any excess paper against the tear-off blade.
Contact a service representative if this does
not resolve the problem.
Open the front cover and check the slip table
and under the carriage. Remove any paper
you see.
If you cannot see a paper jam or other
obstruction, contact a service representative.
Open Front Cover and clear paper from path.
If visible through Front Window, open access
door and clear paper jam, if not, open Front
Cover and clear jam.
Where to Go
See "Loading and
Changing the Receipt
Paper" in chapter 2.
Where to Go
See "Loading and
Changing the Receipt
Paper" in chapter 2.
See "Contacting a Service
Representative" later in
this chapter.
See "Contacting a Service
Representative" later in
this chapter.
November 2002
Chapter 3: Solving Problems
48