NCR 7167 Owner's Manual page 116

7167 Owner's Manual
Initialize Printer
Clears the print line buffer and resets the printer to the default settings for the startup
configuration (refer to Default settings above.)
Single-Wide, Single-High, Non-Rotated, and Left-Aligned characters are set and User-
defined characters or logo graphics are cleared (Flash Memory is not affected). Tabs are
reset to default settings. Receipt selection state is selected.
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H40)
Set Slip Paper Eject Length
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H43) & Chr$(n)
Exception:
This command is ignored.
94
ASCII: ESC @
1B 40
Hexadecimal:
27 64
Decimal:
Default: Receipt
Character Pitch: 15.6 CPI
Column Width: 44 characters (80mm)
32 characters (58mm)
Extra Dot Rows: 2
Code Page 437
Character Set:
Column One
Printing Position:
ASCII: ESC C n
Hexadecimal: 1B 43 n
Decimal: 27 67 n
Value of n : 0 to 255
Slip
13.9 CPI
45 characters
3
Code Page 437
Column One
November 2002
Chapter 6: Commands