Print Zones; Receipt Station; Slip Station - NCR 7167 Owner's Manual

7167 Owner's Manual

Print Zones

This section shows the printable area for the slip station and the receipt station.

Receipt Station

For 80 mm Paper
The receipt station centers characters (standard pitch and compressed pitch) and graphics
on an 80 mm wide (3.15 inches) receipt.
Standard pitch: 13 x 24 dots in character cell, 44 characters (columns) per line
Compressed pitch: 10 x 24 dots in character cell, 56 characters (columns) per line
Double byte character: 24 x 24 dots in character cell, 24 characters (columns) per line
Graphics: 576 addressable bits
The minimum print line height is 24 dots for characters and 24 dots for graphics. The
standard print line height is 27 dots (3.38 mm, .133 inches) for characters (with three extra
dot rows). See the following illustration (not to scale).
For 58 mm Paper
The receipt station centers characters (standard pitch and compressed pitch) and graphics
on an 58 mm wide (2.28 inches) receipt.
Standard pitch: 13 x 24 dots in character cell, 32 characters (columns) per line
Compressed pitch: 10 x 24 dots in character cell, 42 characters (columns) per line
Double byte character: 24 x 24 dots in character cell, 17 characters (columns) per line
Graphics: 424 addressable bits
The minimum print line height is 24 dots for characters and 24 dots for graphics. The
standard print line height is 27 dots (3.38 mm, .133 inches) for characters (with three extra
dot rows). See the following illustration (not to scale).
Paper Width = 80 mm (3.15 inc.)
Top Margin, 17.5 mm (.69 in.)
Minimum
Print Zone, 72.10 mm (2.84 in.)
576 Dots
Left and Right Margins, 3.95 mm (.16 in.)
Appendix B: Print Characteristics
November 2002 221