Diagnostic Modes - NCR 7167 Owner's Manual

7167 Owner's Manual
** SET RECEIVE BUFFER SIZE ?
YES
NO
4K Buffer*
One Line
Note: Press the Paper Feed Button for at least one second to validate the selection.
Save Parameters
This function allows to save the selected communication settings or return to the
communication settings to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES
NO, MODIFY

Diagnostic Modes

This function allows the user to put the printer into the following diagnostic modes:
OFF, Normal Mode: this is the normal operating mode of the printer.
Datascope Mode: the receipt printer prints incoming commands and data in hexadecimal format.
Slip test Mode: the slip printer prints two code pages.
Receipt Test Mode: the receipt printer prints two code pages.
MICR Test Mode: the receipt printer prints all characters recognized by the MICR.
Check Flip Test Mode: the check flip mechanism will flip an inserted check.
Print Head Gap Adjustment Mode: the slip printer prints several lines of rolling ascii even receipt
cover is open.
The diagnostic modes are enabled or disabled by using the Configuration Menu. See
"Configuration the Printer," for instructions on how to enter the Configuration Menu.
Press the Paper Feed Button for the diagnostic mode you want.
** SET DIAGNOSTICS MODE ?
-> Long Click
-> Short Click
-> Long Click
-> Short Click
-> Long Click
-> Short Click
YES
NO
OFF, Normal Mode*
Data Scope Mode
Slip Test Mode
Receipt Test Mode
More Options
Enter code, then hold Button DOWN
At least 1 second to validate
-> Long Click
-> Short Click
-> 1 Click
-> 2 Clicks
-> 3 Clicks
-> 4 Clicks
-> 7 Clicks
November 2002
Chapter 4: Diagnostics
60