NCR 7167 Owner's Manual page 149

7167 Owner's Manual
The bits in this command perform the same function as the standalone functions:
1B 16 n
1B 45 n
12
13
1B 2D n
Select or Cancel User-Defined Character Set
Value of n:
Default:
Selects the character set. When an undefined RAM character is selected, the
Code Page 437 character is used. See the Printing Specification Guide for the character sets.
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H25) & Chr$(n)
Select Pitch
Emphasized
Double-wide
Single-wide
Underline
ASCII: ESC % n
Hexadecimal: 1B 25 n
Decimal: 27 37 n
0= Code Page 437
1= User-defined (RAM character set)
2= Code Page 850
Range: 0 - 2
0 (Code Page 437)
November 2002
Chapter 6: Commands
127