Loading The Paper Roll - NCR 7167 Owner's Manual

7167 Owner's Manual

Loading the Paper Roll

Note: Tear off the end of the new roll so that the edge is loose.
1. Place the new roll in the bin with a little extra paper extending over the front.
Be sure the paper unrolls from the bottom of the roll. Otherwise the paper will not
be printed on because the thermal coating will be on the wrong side.
2. Close the receipt cover.
3. Remove the excess paper by tearing it against the tear-off blade.
42
Chapter 2: Setting Up and Using the Printer
1
2
November 2002