Table of Contents
Advertisement
D-12 Installing Windows Server 2003 x64 Editions
Graphics Accelerator Driver
The standard graphics accelerator driver installed by "Update NEC Express5800 system" is
automatically installed.
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Setup.exe" in the following directory.
<DVD-ROM Drive Letter>:\WINNT\W2K3AMD\VIDEO\SETUP.EXE.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive, follow the
direction on the screen and restart the system.
Installing SCSI Controller Driver (N8103-95/N8190-126)
The SCSI controller driver will be installed automatically.
Installing SCSI Controller Driver (N8103-75)
If you utilize SCSI controller driver (N8103-75), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Advertisement
Table of Contents
Troubleshooting
