Installing The Memory Board; Removing The Processor Board Air Baffle - NEC Express5800 series User Manual

Installing the Memory Board

To install the memory board:
1. Holding the bracket on the top edge of the memory board, insert the board
into the guides at both ends of the electronics bay.
2. Align the memory board with the connector on the processor board and
press in on the bracket until the board is fully inserted into the connector.
3. Install the system board access cover and rear access cover following
procedures previously described in this chapter.
4. Plug in the AC power cords and power on the system.

Removing the Processor Board Air Baffle

To remove the processor board air baffle:
4-10 Upgrading Your System
Figure 4-5. Removing the Memory Board
Figure 4-6. Installing the Memory Board