Set Mode
Setting the squelch type for the digital mode
You can set the squelch type for the digital mode.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
Turn O to select [2 DIGITAL].
4
Press H.
5
Turn O to select [2 SQL TYPE].
6
Press H.
7
Turn O to select [SQL TYPE].
8
Press H.
9
Turn O to select a squelch type.
10
OFF: Voice is always output upon receiving a digital signal
from a Yaesu transceiver.
CODE: Voice is output only when receiving a signal with a
corresponding SQL CODE.
BREAK: Voice is output regardless of any squelch code
when the remote station transmits with BREAK
set.
Press M.
11
Turn O to select [SQL CODE].
12
Press H.
13
Turn O to enter a code.
14
You can enter SQL CODE of 126 types from 001 to 126.
Press p to save the SQL CODE setting and exit the Set mode.
15
Setting the pop up time of the remote station information
You can set the time duration to display the remote station information, such as callsign,
on the LCD.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
Turn O to select [2 DIGITAL].
4
Press H.
5
112