Measuring The Battery Voltage And The Transceiver Temperature Power Supply Voltage Measurement Function/Temperature Measurement Function - Yaesu FT1DR Operating Manual

Set Mode
Turn O to select the display method.
6
Select a message type with reference to the following
table:
Remark Default: CALLSIGN
Display
NORMAL
OFF
DC
MESSAGE
CALLSIGN
Press p to save the selected display method, and exit from the Set mode.
7
Measuring the Battery Voltage and the Transceiver Temperature
Power Supply Voltage Measurement Function/Temperature
Measurement Function
You can measure the battery voltage and the temperature inside the transceiver.
When the optional external power supply adapter with a cigarette plug (E-DC-5B) is
connected, the power supply voltage of this adapter is measured.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [10 SENSOR INFO].
4
Press H.
5
The voltage and temperature appear on the LCD.
When the temperature appears on the LCD, pressing V
Remark
toggles the unit of temperature display between °C and °F.
Press M.
7
Press p to exit from the Set mode.
8
108
The YAESU logo appears immediately after power-on.
Immediately after power-on, the reception frequency, etc. appear without
displaying an opening message.
The power supply voltage and time appear immediately after power-on.
A message comprising up to 16 characters
appears immediately after power-on.
Pressing H displays the message registration
screen. Enter a message to be displayed
following the procedure described in "Assigning a
Name to a Memory Channel" (See page 47).
Your callsign appears immediately after power-on.
Display Condition