Yaesu FT1DR Operating Manual page 18

Preparation
1
Install the Battery Pack
2
Turn off the transceiver.
3
Insert the plug of the battery charger (PA-48 or
SAD-11B) in the EXT DC IN jack of the transceiver.
Charging starts.
While the battery is being charged, the display will
indicate "NOW CHARGING".
The charge level is indicated by a bar graph.
It takes about 5 hours to charge the battery pack fully.
When charging is completed, the display will change to
indicate "COMPLETE" and the
Remark In the USA Version, the
charging or when charging is complete. When the
charge is complete, the transceiver turns off after 3 minutes.
Supplement
• The optional Rapid Charger (CD-41) requires about 2.5 hours to charge the supplied battery pack
(about 4 hours to charge the optional battery pack FNB-102LI).
Place the battery pack on the CD-41 so that the rails of the CD-41 fit into the grooves on the battery
pack.
When charging the battery pack using the CD-41, the LED on the CD-41 indicates the state of charging.
During charging: Lights red
Completion of charging: Lights green
18
Grooves in
battery pack
Rapid Charger CD-41
lamp will glow green.
lamp is not lit when
• It takes about 8 hours to charge the FNB-102LI (option).
Fast blink
Battery charger
PA-48 or SAD-11B
(accessory)
Rails
(option)
Slow blink
FT1D