Adjusting The Lcd Backlight And Keypad Key Light Brightness Level; Changing The Opening Message Displayed Immediately After Power-On - Yaesu FT1DR Operating Manual

Adjusting the LCD Backlight and Keypad Key
Light Brightness Level
You can adjust the brightness level of the LCD backlight and keypad key light.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [8 LCD DIMMER].
4
Press H.
5
Turn O to select a brightness level.
6
You can select from LEVEL 1 (DARK) to LEVEL 6
(BRIGHT).
Remark Default: LEVEL 6
Press p to save the selected display brightness level, and
7
exit the Set mode.
Changing the Opening Message Displayed
Immediately after Power-on
You can select the message displayed under the "YAESU" logo from among four types:
"no message", "power supply voltage", "message comprising up to 16 characters", and
"callsign".
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [9 OPENING MESSAGE].
4
Press H.
5
Set Mode
107