Setting The Transmission Modulation Level - Yaesu FT1DR Operating Manual

Set Mode
Turn O to select [1 MODE].
4
Press H.
5
Turn O to select [2 ANTENNA ATT].
6
Press H.
7
Turn O to select [ON].
8
Remark Default: OFF
Press p to save the attenuator function setting, and exit
9
the Set mode.
Tip
• The amount of attenuation by the attenuator (ATT) is about 10 dB.

Setting the transmission modulation level

You can set the transmission modulation level to half of its usual level.
Set [OFF] for normal amateur operation.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
Turn O to select [1 MODE].
4
Press H.
5
Turn O to select [3 HALF DEVIATION].
6
Press H.
7
Turn O to select [ON]
8
Remark Default: OFF
Press p to save the transmission modulation level is set,
9
and exit the Set mode.
110