Displaying The Gps Screen; Enter The Set Mode - Yaesu FT1DR Operating Manual

Set mode option No./
setting Item
9-26 POSITION
COMMENT
9-27 SmartBeaconing
9-28 TIME ZONE
* For more details of functions, refer to the APRS Section in the instruction manual.
10 SD CARD
10-1 BACKUP
10-2 MEMORY CH
10-3 GROUP ID
10-4 FORMAT
11 OPTION
11-1 USB CAMERA
12 CALLSIGN

Displaying the GPS screen.

When using the GPS function, you can display the GPS information on the LCD.

Enter the Set mode:

Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [1 GPS INFO].
4
Press H to display the GPS information on the LCD.
5
Description of function
Set up the position comment
function.
Set the smart beaconing function. STATUS:
Set the time zone.
Write or read the information
about your transceiver into or
from the micro SD memory card.
Write or read the memory
channel information into or from
the micro SD memory card.
Write or read GROUP ID
information into or from the micro
SD memory card.
Format the micro SD memory
card.
Set the USB CAMERA image
size and resolution.
Set the CALLSIGN.
Setting Item
(Bold letters: Default)
Off Duty / En Route /
In Service / Returning /
Committed / Special / Priority /
Custom 0 to 6 / EMERGENCY!
OFF / TYPE1 / TYPE2 / TYPE3
LOW SPD: 2mph to 30mph
HIGH SPD: 31mph to 90mph
SLOW RATE: 1min to 100min
FAST RATE: 10sec to 180sec
TURN ANGL: 5° to 90°
TURN SLOP: 1 to 255
TURN TIME: 5sec to 180sec
UTC ±13.0 H / UTC+0:00
Write to SD / Read from SD
Write to SD / Read from SD
Write to SD / Read from SD
Format
SIZE: 160×120 / 320×240
QUALITY: LOW / NORMAL /
HIGH
–
Set Mode
Reference
page
–
–
–
137
137
138
24
139
140
103