Permitting Transfer Of Home Channel Frequency To Vfo; Using The White Led As A Flashlight - Yaesu FT1DR Operating Manual

Tips
• Data saved to the microSD memory card is saved in xxx.LOG format.
• Saved data can be viewed with PC applications*.
* PC applications are not supported by our company.

Permitting Transfer of Home Channel Frequency to VFO

You can use the set operation to transfer home channel frequency information to the
VFO.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [7 HOME VFO].
4
Press H.
5
Turn O to select Unlock or Lock.
6
ENABLE: Turning O in home channel transfers the home
channel frequency to VFO.
DISABLE: The home channel frequency cannot be
transferred.
Remark Default: ENABLE
Press p to save the frequency transfer ENABLE/
7
DISABLE/Unlock setting, and exit the Set mode.

Using the White LED as a Flashlight

The white LED may be used as a flashlight.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [8 LED LIGT].
4
Press H.
5
The white LED lights as a flashlight.
Press M.
6
The LED goes out.
Press p to exit from the Set mode.
7
Set Mode
129