Split Memory; Recalling A Memory Channel - Yaesu FT1DR Operating Manual

A Wide Variety of Memory Functions

Split Memory

Two different frequencies, one for reception and other for transmission, can be
registered to a memory channel.
1
Register a receive frequency to a memory channel.
Remark See "Registering to Memory Channel" above.
2
Select a transmit frequency in the VFO mode.
Press and hold F over 1 second.
3
Turn O to select the memory channel number that you registered the receive
4
frequency to.
While pressing p, press F to save the Split memory
5
channel.
When you recall the memory channel to which you
registered two different frequencies (one for receive and
the other for transmit), the @ appears on the LCD

Recalling a Memory Channel

Recall a registered memory channel using the following procedure:
Press V to enter the Memory mode and the memory
1
channel you used last appears on the LCD.
Turn O to select the desired memory channel.
2
Select the memory channel to use.
Remarks • You can directly recall a memory channel using numeric
keys.
To recall memory channel 15: Press 15H
• Pressing F and turning O allows you to skip memory channels quickly in steps of 10
memory channels.
Press V to exit the Memory mode, and the frequency selected in the VFO mode
3
appears.
Tips
• Unregistered memory channels are skipped.
• By default, a priority memory channel, which is used as dual receive priority memory channel, is
set to the memory channel number 1. [P] appears on the upper right corner of the priority memory
channel number (See page 75).
• The frequency registered to a memory channel can be transferred to the VFO operating band in the
following procedure:
Press and hold F over 1 second.
• To place the FT1DR/DE transceiver in the Memory Channel only mode, use the following procedure,
which allows the use of memory channels only.
Press V while pressing P to turn on the transceiver.
To cancel the Memory Channel Only mode, press P while pressing V again.
44
Press V
"OVERWRITE OK?" appears
Press V.