Set Mode
Setting the display method of the remote station information
Set the display method of the remote station information when using the GM Function.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [2 TARGET LOCATION].
4
Press H.
5
Turn O to select the display method.
6
COMPASS: Compass appears.
NUMERIC: Longitude and latitude appear.
Press p to set the selected display method, and exit from
7
the Set mode.
Caution
When the NUMERIC is selected, only the location information of the remote station appears on the
LCD. The BACKTRACK function is not activated.
Setting the display method for BACKTRACK
You can set the BACKTRACK screen display method.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [1 DISPLAY].
2
Press H.
3
Turn O to select [3 COMPASS].
4
Press H.
5
Turn O to select the display method.
6
HEADING UP: Heading direction is indicated upward.
NORTH UP: North direction is indicated upward.
Press p to save the selected display setting and exit the
7
set mode.
104