Turning On/Off The Transceiver At The Specified Time Timer Function; Password Function - Yaesu FT1DR Operating Manual

Turning on/off the transceiver at the specified time
Timer Function
You can turn the transceiver to turn on/off at the set time. Before using this function,
adjust the clock. See "Setting clock time" on page 34.
Enter the Set mode:
Press and hold M over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [11 TIMER].
4
Press H.
5
Turn O to select [ON] or [OFF].
6
ON: Turns on the transceiver at the specified time.
OFF: Turns off the transceiver at the specified time.
Press H.
7
Turn O to specify hours.
8
Press H.
9
Turn O to specify minutes.
10
Press H.
11
Turn O to switch between ON/OFF of the timer.
12
Press M.
13
The timer function is turned on.
Press p to exit from the Set mode.
14

Password Function

You can enter a 4-character password to prevent a third party from using your
transceiver without permission. Once a password is entered, the transceiver cannot be
turned on until the valid password is entered.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [12 PASSWORD].
4
Press H.
5
Press H.
6
Set Mode
131