5 Setting the squelch type separately for transmit and receive
The squelch type can be set separately for transmit and receive.
1. Press and hold the [F(SETUP)] key [SIGNALING] [5 SQL EXPANSION]
2. Press the DIAL knob to select the desired setting.
ON
Add squelch types for transmit and receive, respectively.
OFF
Does not add squelch types for transmit and receive, respectively.
The default setting: OFF
6 ON/OFF for the Weather Alert Feature
Setting the weather Alert Feature, to notify of storms and hurricanes, ON or OFF.
1. Press and hold the [F(SETUP)] key [SIGNALING] [5 WX ALERT]
2. Press the DIAL knob to select the desired setting.
ON
Enables the Weather Alert Feature.
OFF
Disables the Weather Alert Feature.
The default setting: OFF
Setup Menu: SCAN
1 Setting the Time to Resume Scanning SCAN RE-START Function
Set the time interval to resume scanning after a received signal ends during scanning.
1. Press and hold the [F(SETUP)] key [SCAN] [1 SCAN RESUME]
2. Rotate the DIAL knob to select the desired setting.
BUSY
HOLD
1 sec / 3 sec / 5 sec Restart scanning after receiving the frequency for the set
The default setting: BUSY
Setup Menu: GM Menu Operations
For details on setting each item, refer to "FTM-300DR/DE GM Function Instruction Man-
ual" which is available on Yaesu website.
Setup Menu: WIRES-X Menu Operations
For details on setting each item, refer to "FTM-300DR/DE WIRES-X Instruction Manual"
which is available on Yaesu website.
Continue receiving the frequency until the signal disappears.
Stop scanning and receive that frequency.
amount of time.
50