Communicating With Specified Stations In The Analog Fm Mode; Selecting The Squelch Type In The Analog Fm Mode - Yaesu FTM-500DR Advance Manual

Communicating with specified stations in the Analog FM mode

Selecting the squelch type in the analog FM mode

1. Press the FUNC knob  [SQL]  Press the FUNC
knob or press and hold the FUNC knob  [45 SQL
TYPE]
2. Rotate the FUNC knob to select the type of squelch,
refer to the table below.
3. Press the DIAL knob, SUB DIAL knob or PTT switch
to finish the setting and return to the original screen.
Tone squelch (CTCSS), DCS and the New PAGER (EPCS) functions do not operate in
the C4FM digital mode. Press the [DX] key to change to the Analog FM mode, or turn the
AMS function ON.
Squelch type
OFF
T-ENC
(TONE ENC)
T-SQL
(TONE SQL)
REV-T
(REV TONE)
DCS
PRFRQ
(PR FREQ)
PAGER
D-ENC*
(DCS ENC)
T-DCS*
(TONE DCS)
D-TSQ*
(DCS TSQL)
* Press and hold FUNC knob  [47 SQL EXPANSION]  Press the FUNC knob to ac-
cess "ON", "D-ENC (DCS ENC)", "T-DCS (TONE DCS)" and "D-TSQ (DCS TSQL)" set-
ting values are activated.
Deactivates the CTCSS and DCS functions. Returns to the normal
squelch operation in the Analog FM mode.
Activates the CTCSS tone for Analog FM Transmissions. Receives
with normal squelch operation.
Activates the CTCSS tone squelch function on Analog FM receive.
Activates the reverse tone function. Used to monitor communications
based on the squelch control system. When a signal contains the
designated tone, the squelch is not opened, and when the tone signal
disappears, the squelch opens, and communication starts.
Activates the Digital Code Squelch (DCS) function. The DCS code
may be selected from 104 codes (from 023 to 754).
Activates the no-communication squelch function for radios. The no-
communication signal tone frequencies may be specified within the
range of 300 Hz to 3000 Hz in steps of 100 Hz.
A c t i v a t e s a n e w t w o - t o n e C T C S S p a g e r f u n c t i o n . W h e n
communicating with transceivers among friends, specify personal
codes (each code is composed of two tones) so that only specific
stations are called.
Transmits the signal containing the DCS CODE. Receives as a
normal squelch operation.
Sends a tone signal when transmitting, and receives only signals with
a matching DCS code.
Sends a DCS CODE when transmitting and receives only signals that
contain a matching tone signal when receiving.
9
KEYPAD
SCAN
SQL
RPT-R
DTMF
Description
HOME CH
TXPWR HIGH
OFF ARS AUTO
TONE 100.0
APRS OFF
OFF