Selecting The Squelch Type In The Analog Fm Mode - Yaesu FTM-7250DR Advance Manual

Advanced Operation

Selecting the Squelch Type in the Analog FM Mode

1. Press and hold the [ MHz ( SETUP )] key to enter the Set mode.
2. Rotate the DIAL knob to select "SQL TYPE 44".
3. Press the [ MHz ( SETUP )] key, then rotate the DIAL knob to select the squelch type.
Tone squelch (CTCSS), DCS and the New PAGER (EPCS) functions do not operate in the
C4FM digital mode. Press the [ MODE ( DG-ID )] key to switch the communication mode to AMS
(Auto Mode Select function) or analog (FM) mode.
Squelch type Icon indication
OFF
TONE
TSQL
DCS
RV TONE
PAGER
D CODE*
T DCS*
D TONE*
*: Turning the Set Mode "SQL EXP 43" to ON, "D CODE", "T DCS" and "D TONE"
setting values are activated.
4. Press and hold the [ MHz ( SETUP )] key to save the new setting and exit to normal
operation.
z The squelch type may be set for each frequency band (BAND).
z The CTCSS and DCS squelch settings are also active during scanning. If scanning is
performed with the CTCSS and DCS squelch function activated, scanning stops only
when a signal containing the specified CTCSS tone or DCS code is received.
z Set Mode [13 DCS.INV] (30) allows to receive the DCS code of the inverted phase.
Deactivates the tone squelch function and DCS function OFF,
-
then returns to the normal squelch operation in the An-alog
FM mode.
Analog FM Transmissions contain the CTCSS tone. Receives
T
(appears)
as a normal squelch operation.
Activates the CTCSS tone squelch function on Analog FM
T SQ
(appears)
receive.
Activates the Digital Code Squelch (DCS) function. The DCS
DCS
(appears)
code may be selected from 104 codes (from 023 to 754).
Activates the reverse tone function. Used to monitor commu-
nications based on the squelch control system. When a sig-
T SQ nal contains the designated tone, the squelch is not opened,
(blinks)
and when the tone signal disappears, the squelch opens and
communication starts.
Activates a new two-tone CTCSS pager function. When com-
municating with FTM-7250DR transceivers among friends,
P
(appears)
specify personal codes (each code is composed of two tones)
so that you can call only specific stations.
Transmits the signal containing the DCS CODE. Receives as
DCS
(blinks)
a normal squelch operation.
T Sends a tone signal when transmitting, and receives the only
(blinks)
DCS
signal matches the DCS code when receiving.
(appears)
T SQ Sends the DCS CODE when transmitting, and receives only
(appears)
DCS
signals that contain a matching tone signal when receiving.
(blinks)
Description
4