Assigning A Name To A Memory Bank; Assigning A Name To A Memory Channel; Prohibiting Registration To Memory Channel Memory Channel Protect Function; Setting Memory Skip Function - Yaesu FT1DR Operating Manual

Set Mode

Assigning a name to a memory bank

A memory bank can be assigned a name with up to 16 characters.
For more details, see "Assigning Name to Memory Bank" on page 49.

Assigning a name to a memory channel

Memory channels and home channels may be assigned a name (memory tag) such as
a callsign or broadcast station name.
For more details, see "Using Memory Tag" on page 46.
Prohibiting registration to memory channel
Memory Channel Protect Function
A memory channel may be protected so that a new frequency or memory channel tag
name cannot be registered to it.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [3 MEMORY].
2
Press H.
3
Turn O to select [4 MEMORY PROTECT].
4
Press H.
5
Turn O to select [ON].
6
Any registration to the memory channel is prohibited.
Remark Default: OFF
Press p to save the memory channel protect, and exit the
7
Set mode.

Setting memory skip function

Set the scan method for scanning memory channels.
For more details, see "Specifying a Skip/Selected Memory Channel" on page 60.
116