Notification Of A Call From A Remote Station By Vibration; Saving/ Loading Data To/From Microsd Memory Card; Saving/ Loading Memory Channel Information To/From Microsd Memory Card - Yaesu FT1DR Operating Manual

Notification of a call from a remote station by vibration

The vibrator function may be set to notify you of a call from a remote station.
For details, see "Notification of Call from the Remote Station by Vibration of the Vibrator"
on page 88.

Saving/ Loading data to/from microSD memory card

Settings information can be saved to a microSD memory card, also the saved
information can be loaded to the transceiver.
Enter the Set mode:
Press and hold M over 1 second.
1
Turn O to select [10 SD CARD].
2
Press H.
3
Turn O to select [1 BACKUP].
4
Press H.
5
Turn O to select [Write to SD] or [Read from SD].
6
Write to SD: Saves the setting information of your
transceiver to the microSD memory card.
Read from SD: Loads the setting information to your
transceiver from the microSD memory card.
Cancel: Stops save or load.
Press H.
7
[OK?] appears on the LCD.
Press H.
8
The write or read is performed and [Completed] appears
when finished.
Press p to exit from the Set mode.
9
Saving/ Loading memory channel information
to/from microSD memory card
Memory channel setting information can be saved to a microSD memory card, or saved
information can be loaded to this transceiver.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [10 SD CARD].
2
Press H.
3
Set Mode
Blinks when writing
137