Assigning A Name To A Memory Channel; Displaying Memory Tag - Yaesu FT1DR Operating Manual

Assigning a Name to a Memory Channel

Example: Assignment of name [YAESU]
1
Switch to the Memory mode.
2
Recall the memory channel to assign a name.
Press and hold M for over 1 second to enter the Set
3
mode.
Turn O to select [3 MEMORY].
4
Press H.
5
Turn O to select [3 MEMORY NAME].
6
Press H.
7
The cursor appears on the LCD.
Press 9 8 times to select the numeric character [Y].
8
Press H to move the cursor to the next character
9
position.
Press 2 5 times to select the numeric character [A].
10
Press H to move the cursor to the next character position.
11
Press 3 6 times to select the numeric character [E].
12
Press H to move the cursor to the next character position.
13
Press 7 9 times to select the numeric character [S].
14
Press H to move the cursor to the next character position.
15
Press 8 6times to select the numeric character [U].
16
Press p to save the memory tag to the memory channel and exit the Set mode.
17
Tips
• To delete a character, press F. The character is deleted and the cursor moves to left.
• Pressing 0 while entering alphanumeric characters (A,0) allows you to select 0, (space), –, /, ?,
!, ., : and #
• When entering the same character repeatedly, press H to move the cursor.
• When assigning a name to a home channel, recall the target home channel by first executing step 1
(see above).

Displaying Memory Tag

During mono band operation, the tag (name) of the memory channel or home channel
can be displayed using the following procedure:
1
Switch to the Memory mode.
Press and hold A for over 1 second.
2
The operating band is displayed in Mono band, and a tag
(name) appears under the frequency.
A Wide Variety of Memory Functions
Tag (name) display
47