Saving/ Loading Group Id Information To/From Microsd Memory Card - Yaesu FT1DR Operating Manual

Set Mode
Turn O to select [2 MEMORY CH].
4
Press H.
5
Turn O to select [Write to SD] or [Read from SD].
6
Write to SD: A beep is heard and [Completed] appears
when writing to SD finished.
Read from SD: A beep is heard when loading from SD
Cancel: Stops save or load.
Press H.
7
[OK?] appears on the LCD.
Press H.
8
The write or read is performed and [Completed] appears when finished.
Press p to exit from the Set mode.
9
Saving/ Loading GROUP ID information to/from
microSD memory card
Group ID setting information can be saved to a microSD memory card, or saved
information can be loaded to this transceiver.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [10 SD CARD].
2
Press H.
3
Turn O to select [3 GROUP ID].
4
Press H.
5
Turn O to select [Write to SD] or [Read from SD].
6
Write to SD: Saves the Group ID information to your
transceiver to the microSD memory card.
Read from SD: Loads the Group ID information to your
Cancel: Stops save or load.
Press H.
7
[OK?] appears on the LCD.
138
finished and the transceiver restarts with
the settings read from the microSD memory
card. (The operation in step 9 is not
required.)
transceiver from the microSD memory
card.
Blinks when writing