Setting Memory Bank Link - Yaesu FT1DR Operating Manual

Turn O to select [3 AUDIO].
4
Press H.
5
Turn O to select [4 VOL MODE].
6
Press H.
7
Turn O to select [AUTO BACK].
8
Remark Default: NORMAL
Usually adjust the sound volume by turning O while pressing
Tip
v. If the [AUTO BACK] is selected, the sound volume
adjustment mode will be automatically canceled after you have
pressed v to enter the sound volume adjustment mode and
return to the frequency display screen.
Press p to exit the Set mode.
9

Setting memory bank link

You can link multiple registered memory banks, and also recall a frequently used
memory bank immediately
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [3 MEMORY].
2
Press H.
3
Turn O to select [1 BANK LINK].
4
Press H.
5
Turn O to select a memory bank to link.
6
Press B.
7
The cursor moves to the position (such as BANK1) to set
link.
Turn O to select [ON].
8
Remark Default: OFF
Press B.
9
10
Also set link to other memory banks.
Set link to each memory bank from memory bank 1
through memory bank 24 by repeating step 6 to 9.
Press H.
11
The memory bank link is set.
Press p.
12
Exits from the Set mode.
Set Mode
115