Yaesu FT1DR Operating Manual page 83

Taking picture with the optional camera mounted on speaker microphone.
Send Image Button
A picture just taken can be
sent.
PTT Switch
Press this button to transmit,
and release it for reception.
Speaker
Sound is emitted from here.
Connector
Connector to connect
the speaker microphone
with camera to the
transceiver
Pay attention to the alignment of connector
when connecting the speaker microphone
with camera to the ranceiver.
Connecting it forcibly to the transceiver
may cause damage.
1
Connect the speaker microphone with camera (MH-85A11U) to the DATA terminal of
the transceiver.
Press P to turn the transceiver on.
2
3
Press .
Point the lens towards the object to shoot and press
Make sure to have at least 50cm between the lens and the object. If the object is too
close, the picture will be out of focus, resulting in a blurred picture.
Tips • You can set the picture size (resolution) and image quality (compression rate) of the image,
by selecting [11 OPTION]
• Captured images are saved to the microSD memory card installed in the transceiver.
• If your transceiver and another compatible transceiver are both in digital mode, a picture just
taken may be sent to the other transceiver by pressing
Caution
z Do not directly photograph objects with strong light, such as the sun or other bright objects. Such
operation can lead to malfunction.
z If the lens or the microphone gets dirty, use a dry, soft cloth to wipe off the contaminants.
z Do not place the MH-85A11U near heat emitting equipment or where it is exposed to direct sunlight.
Doing so can lead to fire or a malfunction.
z Do not drop the MH-85A11U. Applying a strong shock to the MH-85A11U may result in damages or
failure.
Lens
Aim this lrns towards the object to photograph.
Do not touch the lens with fingers or other objects.
[1 USB CAMERA] in the Set mode.
Shutter Button
Press this button to take a
picture.
Microphone
Speak into here with a
normal voice.
Clip
Securely clip the microphone
to belt or other objects.
.
.
83