Displaying The Version Of The Dsp Program; Adjusting The Microphone Sensitivity Microphone Gain - Yaesu FT1DR Operating Manual

Turn O to select [3 DIGI POPUP].
6
Press H.
7
Turn O to select the display method.
8
OFF: Does not display the remote station information.
BND2s to 60s: Set the time to display the remote station
information (2 to 60 seconds).
BNDCNT: Always display the remote station information.
Tip Default: 10 seconds
Press p to save the pop up time setting and exit the Set mode.
9

Displaying the version of the DSP program

You can check the DSP program version of the built in digital unit of the transceiver.
First enter the digital mode, and then enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
Turn O to select [2 DIGITAL].
4
Press H.
5
Turn O to select [5 DSP Ver].
6
Press H.
7
The version of the DSP program appears on the LCD.
Press p to exit from the Set mode.
8
Adjusting the microphone sensitivity
You can adjust the input level of the built-in microphone or an optional external
microphone.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
Microphone Gain
Set Mode
113