Sending A Dtmf Code Manually - Yaesu FT1DR Operating Manual

Sending a DTMF Code Manually

Press and hold M for over 1 second to enter the Set mode.
1
Turn O to select [4 SIGNALING].
2
Press H.
3
Turn O to select [4 DTMF MODE].
4
Press H.
5
Turn O to select [MODE].
6
Press H.
7
Turn O to select [MANUAL].
8
Press M.
9
Press p to set [MANUAL].
10
While pressing p, select the DTMF code to transmit by
11
pressing 1 to 0 , A, B, C, ½, and # on the numeric
keys.
Tips • The DTMF code selected by pressing the keys is transmitted (refer to chart below).
• The transmitted DTMF tone can be heard from the speaker.
Release p.
12
Even if p is released, the DTMF tone signal will continue to be transmitted until
transmission of the signal is complete.
Tips
• The DTMF code is a combination of 2 frequencies.
1209Hz
697Hz 1
770Hz 4
852Hz 7
¼
941Hz
1336Hz 1477Hz 1633Hz
2 3
5 6
8 9
0 #
Using the DTMF Function
A
B
C
D
81