Confirming The Entered Dtmf Code By The Sound; Sending The Registered Dtmf Code - Yaesu FT1DR Operating Manual

Using the DTMF Function
Press p to set the DTMF code and exit from the Set
11
mode.

Confirming the entered DTMF code by the sound

Press and hold M for over 1 second to enter the Set mode.
1
Turn O to select [4 APRS].
2
Press H.
3
Turn O to select [5 SCAN].
4
Press H.
5
Turn O to select the memory channel to which the DTMF
6
code was registered.
Press F to confirm the registered DTMF code by the
7
audio tones.
Press p to exit from the Set mode.
8

Sending the Registered DTMF Code

Press and hold M over 1 second to enter the Set mode.
1
Turn O to select [4 SIGNALING].
2
Press H.
3
Turn O to select [4 DTMF MODE].
4
Press H.
5
Turn O to select [MODE].
6
Press H.
7
Turn O to select [AUTO].
8
Press M.
9
Press p to set the auto dialer.
10
While pressing p key, press 1 to 0 to select the
11
DTMF memory channel to transmit with the numeric keys.
Tips • The registered DTMF code is transmitted.
• The transmitted DTMF tone can be heard from the speaker.
Release p.
12
Even if p is released, the DTMF tone signal will continue to be transmitted until
transmission of the signal is complete.
80