Muting Voice; Simultaneously Radio Broadcast Reception; Changing The Sound Volume Setting Method - Yaesu FT1DR Operating Manual

Set Mode
Turn O to select [3 AUDIO].
4
Press H.
5
Turn O to select [1 MIC GAIN].
6
Press H.
7
Turn O to select a microphone sensitivity level.
8
Select a microphone gain level from the following:
LEVEL 1 (Lowest sensitivity) to LEVEL 9 (Highest
sensitivity)
Remark Default: LEVEL 5
Press M twice.
9
The selected microphone gain level is set.
Press p to exit the Set mode.
10
Tips
• Increasing the microphone gain excessively can distort the sound or pick up the surrounding noise,
impairing intelligibility.
• Be sure to adjust the microphone gain whenever you change microphones.

Muting Voice

In the dual reception mode, the audio being received on the non-operating band is
muted when a signal is herd on the operating band.
For more details, see "Muting Audio" on page 35.

Simultaneously radio broadcast reception

Set the mute time of the simultaneous broadcast reception.
For more details, see "AF-DUAL Function" for simultaneously monitoring the amateur
frequency while listening to the broadcast radio.

Changing the sound volume setting method

You can set the sound volume adjustment mode to be automatically canceled after
about 3 seconds, after pressing v and then adjusting the sound volume with O.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [2 TX/RX].
2
Press H.
3
114