Setting The Direction For Repeater Shift Rpt Shift Function; Setting The Range For Repeater Shift Rpt Shift Freq Function - Yaesu FT1DR Operating Manual

Set Mode
Setting the direction for repeater shift
RPT SHIFT Function
You can set the direction of repeater shift.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [15 RPT SHIFT].
4
Press H.
5
Turn O to select the shift direction.
6
SIMPLEX: Does not shift.
–RPT: Shifts toward lower frequencies.
+RPT: Shifts toward higher frequencies.
Remark Default setting differs depending frequency
Press p to save the repeater shift direction setting, and
7
exit the Set mode.
Setting the range for repeater shift
RPT SHIFT FREQ Function
You can set the repeater shift range.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [16 RPT SHIFT FREQ].
4
Press H.
5
Turn O to select shift range.
6
The range can be set in steps of 50 kHz between 0.0000
MHz and 150.000 MHz.
Pressing F and then turning O allows you to set
frequencies in steps of 1 MHz.
Remark Default setting differs depending frequency
Press p to save the repeater shift range setting, and exit
7
the Set mode.
134