Turning Off The Busy Indicator - Yaesu FT1DR Operating Manual

Turn O to select [SELECT].
6
Press H.
7
Turn O to select [OFF].
8
Remarks Default: KEY&SCAN
Display
OFF Mutes the beep.
KEY&SCAN Emits a beep when a key is operated or
scanning stops.
KEY Emits a beep when a key is pressed.
Press M.
9
Turn O to select [EDGE].
10
Press H.
11
Turn O to select [OFF].
12
Press p to exit from the Set mode.
13

Turning off the BUSY Indicator

When you listen to the radio continuously or when the remaining battery level has
become low, you can turn off the BUSY indicator to save battery power consumption.
Enter the Set mode:
Press and hold M for over 1 second.
1
Turn O to select [8 CONFIG].
2
Press H.
3
Turn O to select [4 BUSY LED].
4
Press H.
5
Turn O to select a band.
6
Select a band from among [A BAND], [B BAND], and
[RADIO].
Press H.
7
Turn O to select [OFF].
8
Remark Default: ON
Press p.
9
The BUSY indicator is turned off, and exits from the Set
mode.
Description
Set Mode
127