Setting The Squelch Type In Digital Mode (4 Digital Sql Type) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 2 TX/RX
1 AUTO:
Automatically selects one of the 4 communication modes according to the
received signal.
2 TX MANUAL:
Automatically selects one of the 4 communication modes according to the
received signal. Briefly pressing [PTT] on the microphone switches between digital
mode and analog mode.
3 TX FM FIXED:
Automatically selects one of the 4 communication modes according to the
received signal. Always switches to FM mode for transmission.
4 TX DN FIXED:
Automatically selects one of the 4 communication modes according to the
received signal. Always switches to DN mode for transmission.
5 TX VW FIXED:
Automatically selects one of the 4 communication modes according to the received signal. Always
switches to VW mode for transmission.
Tips • The default setting: 2 TX MANUAL
• When "
• When "
• When "
*The "○○" part differs depending on the received signal.
5
Press and hold
Sets the transmission mode when using the AMS function and returns the display to
the previously viewed screen.

Setting the squelch type in digital mode (4 DIGITAL SQL TYPE)

You can set the squelch type in digital mode.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [2 TX/RX], then press
.
3
Rotate the DIAL to select [4 DIGITAL SQL TYPE],
then press
126
" blinks: 2 TX MANUAL
▀
○○ " blinks: 3 TX FM FIXED / 4 TX DN FIXED / 5 TX VW FIXED
▀
○○ " lights up: 1 AUTO
▀
for over one second.
over one second.
.