Yaesu FT1DR Operating Manual page 50

Using Memory Bank
Turn O to select [2 BANK NAME].
4
Press H.
5
Turn O to select a memory bank.
6
Select the number of the memory bank to which you want
to assign a name.
Press H to move the cursor to the first character of the
7
bank name.
Press 1 to select the numeric character [1].
8
Press H to move the cursor to the next character
9
position.
Press 4 7 times to select the numeric character [4].
10
Pressing 4 allows you to select the following characters
sequentially:
G H I
Press H to move the cursor to the next character
11
position.
Press the 4 key 7 times to select the numeric character
12
[4].
Pressing the 4 key allows you to select the following
characters sequentially:
G H I
Press H to move the cursor to the next character
13
position.
Press 6 to select [M].
14
Pressing 6 allows you to select the following characters
sequentially:
M N O
Press H to move the cursor to the next character
15
position.
16
Select [H].
17
Press [9] 8 times.
Select [z].
Press p to save the name of memory bank and exit the Set mode.
18
Tips
• To delete a character, press F. A character is deleted and the cursor moves to left.
• Pressing 0 while entering alphanumeric characters (A,0) allows you to select 0, (space), –, /, ?,
!, ., : and #
• When entering the same type of characters repeatedly, press H to move the cursor.
50
g h i 4 G
g h i 4 G
m n o 6 M
Bank number
Change the bank name.
Enter a name (First digit)