Adding A New User - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
The Users pane is displayed.
The list includes three columns: User Name, Authorization Level and Disabled.
The User Name is the login name used by the user to connect to the MCU.
The Authorization indicates the Authorization Level assigned to the User: Administrator,
Administrator Read-only, Operator, Chairperson or Auditor.
Disabled indicates whether the user is disabled and cannot access the system unless enabled by
the administrator. For more details, see
Locked indicates whether the user has been locked out and cannot access the system unless
enabled by the administrator.
In Ultra Secure Mode (ULTRA_SECURE_MODE=YES), Users can be automatically disabled or
locked out by the system when they do not log into the Collaboration Server application for a
predefined period or if their login session does not meet Enhanced Security requirements. Users can
be manually disabled by the administrator. For more details, see

Adding a New User

Administrators can add new users to the system.
The User Name and Password must be in ASCII.
To add a new user to the system:
1 In the RMX Management pane, click the Users (
2 The Users pane is displayed.
3 Click the New User (
Polycom®, Inc.
Disabling a User
) button or right-click anywhere in the pane and then click New User.
.
Notes on page 461.
) button.
455