Management Redundancy On Realpresence Collaboration Server (Rmx) 1800; Configuration Requirements; Realpresence Collaboration Server (Rmx) 1500; Realpresence Collaboration Server 1800 - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide

Management Redundancy on RealPresence Collaboration Server (RMX) 1800

On the RealPresence Collaboration Server 1800, for Management Redundancy, the LAN 2 port is
redundant to the LAN 1 port and must have a LAN cable connected.
RealPresence Collaboration Server 1800 - LAN 2 connection on Rear Panel
On the RealPresence Collaboration Server 1800, Management Redundancy is implemented using the LAN
1 and LAN 2 ports and is dependent on the settings of the LAN_REDUNDANCY and
MULTIPLE_SERVICES System Flags as summarized in the following table.
RMX 1800 - Management Redundancy - System Flags
Flag / Value
LAN_REDUNDANCY
MULTIPLE_SERVICES = NO
LAN_REDUNDANCY
MULTIPLE_SERVICES = YES
LAN_REDUNDANCY
MULTIPLE_SERVICES = NO
LAN_REDUNDANCY
MULTIPLE_SERVICES = YES

Configuration Requirements

LAN Redundancy is disabled by default and is enabled by changing the LAN_REDUNDANCY system flag
to YES and connecting the appropriate LAN cables to the LAN ports on the Collaboration Server as follows:

RealPresence Collaboration Server (RMX) 1500

● Connect the additional LAN cable to LAN 1 port on the RTM IP.

RealPresence Collaboration Server 1800

● Connect the additional LAN cable to LAN 2 port on the rear panel of the Collaboration Server 1800.
Polycom®, Inc.
Port Usage
LAN 1
= NO Management
= NO Management
= YES Management, Media and Signaling.
= YES
Flags cannot be set to YES simultaneously.
LAN 2
Media and Signaling
Media and Signaling
LAN 2 is redundant to LAN 1
503