Polycom 1500 Administrator's Manual page 926

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
5 Run Diagnostic Tests & Tests Monitoring by clicking the Run Tests button. In the Hardware Monitor
pane, the toolbar and card statuses change to Tests in progress.
Run Tests - Parameters
Parameter
Diagnostic Status
Estimated Duration
Time Left
When the Collaboration Server enters "Diagnostics Mode", the status MPMx/MPMrx, CNTL/CNTL
1500/CNTL 4000 and RTM IP/RTM IP 1500/RTM IP 4000 changes to "Diagnostics"
6 The Diagnostics Summary pane is displayed at the bottom of the Hardware Monitoring pane.
Polycom®, Inc.
Description
Basic Diagnostic Status:
• Ready - ready to run diagnostics
• Test in Progress - running diagnostics
• Passed/Failed - Passed/Failed the diagnostics tests
Estimated time needed to run Basic Diagnostic tests.
Estimated time to complete Basic Diagnostic tests.
894