Polycom 1500 Administrator's Manual page 783

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
Flag
HIDE_SITE_NAMES
INTERNAL_SCHEDULER
ISDN_COUNTRY_ CODE
ISDN_IDLE_CODE_E1
ISDN_IDLE_CODE_T1
ISDN_LEGACY_EP_CLOSE_CO
NTENT_FORCE_H263
ISDN_NUM_OF DIGITS
Polycom®, Inc.
Description
From version 7.6.1, in MPMx Card Configuration Mode, this flag has
been replaced by the Enable Site Names option in the Conference
Profile - Site Names dialog box. It allows you to enable or disable the
display of site names in conferences per conference.
In versions prior to 7.6, set this flag to ON to cancel the display of site
names.
When set to ON and the display is disabled, the flag
SITE_NAMES_ALWAYS_ON =YES is ignored.
Default: OFF
Note: This option is unavailable in VSW conferences.
When set to NO (default) this flag prevents potential scheduling
conflicts from occurring as a result of system calls from external
scheduling applications such as Polycom ReadiManager®, CMA™
4000/5000 and others via the API.
Set to YES to schedule conference reservations using an external
scheduling application.
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The name of the country in which the MCU is located.
Default: COUNTRY_NIL
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The Idle code (silent), transmitted on the ISDN E1 B channels, when
there is no transmission on the channels.
Default: 0x54
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
The Idle code (silent), transmitted on the ISDN T1 B channels, when
there is no transmission on the channels.
Default: 0x13
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
If set to YES, legacy ISDN endpoints that do not support sharing
content over the Content channel receive video over video channel
that is forced to H.263 video.
Default: NO.
Applicable to the RealPresence Collaboration Server
(RMX) 1500/2000/4000 only.
When using ISDN Overlap sending dialing mode, this field holds the
number of digits to be received by the MCU.
Default: 9
751