Procedure 1: Set The Min_Tip_Compatibility_Line_Rate System Flag - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
Multipoint Calls on
Collaboration Server
HDX/ITP to HDX/ITP
HDX/ITP to Cisco CTS
Cisco CTS to HDX/ITP
● H.239
 A variety of resolutions and frame rates are supported.
For more information see
 Can be used with SIP and H.323 endpoints, desktop (CMAD), room systems (HDX) and ITP
(OTX, RPX).
 Not supported by Lync clients, IBM clients and Cisco CTS endpoints.
 Cannot be used when HDX endpoints are registered to CUCM.
● TIP
 The resolution is fixed at XGA at 5fps.
 Supported on HDX, Polycom ITP and Cisco CTS systems.
● The following content compatibility options are available:
 Tip not enabled – CTS cannot join the conference, all other endpoints can share H.239 content.
 TIP video compatibility – CTS receives people video, all other endpoints can share H.239 content.
 TIP video and content compatibility – CTS and HDX can share TIP content, all other endpoints
receive only the people video.
For more information see
Server.

Procedure 1: Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag

The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the minimum line rate at which an
Entry Queue or Meeting Room can be TIP enabled.
CTS version 7 requires a minimum line rate of 1024 kbps and will reject calls at lower line rates, therefore
the SysCollaboration Servertem Flag value must be 1024 or higher.
HD Video Resolutions for TIP calls are determined according to the following table:
TIP HD Video Resolution by Line Rate
Line Rate
Line Rate >=3Mbps
3Mbps > Line Rate >= 936kbps
Line Rate < 936kbps
For more information see
Polycom®, Inc.
Content
Sharing
Yes
Yes
No
H.239 / People+Content.
Procedure 4: Configuring a TIP Enabled Profile on the Collaboration
Modifying System Flags.
Video Resolution
HD1080p30
HD720p30
Call is dropped.
People + Content
No
No
No
1100