Procedure 6: Configuring A Meeting Room On The Collaboration Server; Procedure 7: Configuring Participant Properties For Dial Out Calls - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
2 In the New Entry Queue or Entry Queue Properties dialog box, ensure that Ad Hoc is selected.
3 Ensure that the Entry Queue is designated as the Transit Entry Queue as described in
Transit Entry Queue.

Procedure 6: Configuring a Meeting Room on the Collaboration Server

The Profile for the Meeting Room must be TIP enabled as described in Procedure 4.
For more information see

Procedure 7: Configuring Participant Properties for dial out calls

Participant Properties must be configured to ensure that defined participants inherit their TIP settings from
the Profile assigned to the Meeting Room.
a Define the New Participant's General settings. For more information see
the Address
Polycom®, Inc.
Creating a New Meeting
Book.
Room.
Setting a
Adding a Participant to
1109