Polycom 1500 Administrator's Manual page 801

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
Manually Added, Modified, Deleted System Flags
Flag
ENABLE_CISCO_GK
ENABLE_CLOSED_CAPTION
ENABLE_EPC
ENABLE_FLOW_CONTROL_REI
NVITE
ENABLE_EXTERNAL_DB_ACCE
SS
ENABLE_H239
ENABLE_H239_ANNEX_T
ENABLE_IP_REDIAL
ENABLE_LYNC_RTCP_INTRA
Polycom®, Inc.
Description
When set to YES, it enables the use of an identical prefix for different
Collaboration Servers when registering with a Cisco MCM Gatekeeper.
Default: NO.
Enables or disables the Closed Captions option that allow endpoints to
endpoints to provide real-time text transcriptions or language
translations of the video conference.
When set to NO (default), Closed Captions are disabled.
When set to YES, Closed Captions are enabled.
When set to YES (default), enables Polycom proprietary People+.
When set to NO, disables this feature for all conferences and
participants.
Used to enable or disable sending a re-INVITE to endpoints to adjust
their data rate. When set to YES, re-INVITE is used for endpoints that
do not support flow control in SIP using either the Information or RTCP
Feedback mechanisms.
Default: NO.
If YES, the Collaboration Server connects to an external database
application, to validate the participant's right to start a new conference
or access a conference.
Default: NO
When set to YES, Content is sent via a separate Content channel.
Endpoints that do not support H.239 Content sharing will not be able to
receive
When set to NO, the Content channel is closed. In such a case, H.239
Content is sent via the video channel ("people" video) enabling
endpoints that do not support H.239 Content sharing to receive the
Content in their video channel.
Default: YES.
In H.239-enabled MIH Cascading, when MGC is on level 1, enables
sending Content using Annex T.
In all versions up to version 7.0, when set to YES (default), it enables
re-dialing if H.323 or SIP dial out calls fail.
In version 7.0 and later, this flag functionality is replaced by the Auto
Redialing check box in the Profile Properties - Advanced dialog box
When set to YES, RTCP FIR is used for sending Intra Requests. When
set to NO Intra Requests are sent using SIP INFO Messages.
Range: YES / NO
Default: NO
769