Configuring The Collaboration Server - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
Supported Polycom products
Polycom TIP and SIP
Polycom DMA 7000 system
Polycom RealPresence Collaboration Server (RMX) 2000 and
RealPresence Collaboration Server (RMX) 4000 systems
Immersive Telepresence Systems:
• RPX 200 and 400 systems
• OTX 300 system
• TPX HD 306 system
• ATX HD 300 system
HDX Systems:
• 7000 HD Rev C
• 8000 HD Rev B
• 9006
• 4500
The following Polycom peripheral:
• Polycom Touch Control
SIP ONLY (no TIP support)
Spectralink wireless phones 8020/8030
Polycom VVX 1500
Polycom VVX 1500 C
KIRK Wireless Server 300/600v3/6000
The following procedures 1 -16 are a summary of the configuration procedures.
The detailed procedures 1 - 16 begin with
System Flag.

Configuring the Collaboration Server

1 Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag
2 Configuring the Collaboration Server to statically route outbound SIP calls to DMA or CUCM
3 Configuring the Collaboration Server's H.323 Network Service to register with CMA gatekeeper
4 Configuring a TIP enabled Profile on the Collaboration Server
5 Configuring an Ad Hoc Entry Queue on the Collaboration Server if DMA is not used
6 Configuring a Meeting Room on the Collaboration Server
7 Configuring Participant Properties for dial out calls
Polycom®, Inc.
Version(s)
V4.0
V7.6 and higher
V3.0.3
Requires TIP option key.
Requires Polycom Touch Control.
V3.0.3
Requires TIP option key.
1.3.0
Version(s)
V4.0
V3.3.1
Procedure 1: Set the MIN_TIP_COMPATIBILITY_LINE_RATE
1097