Pim Configuration Examples; Pim-Dm Configuration Example - HP 4800G Series Configuration Manual

To do...
View the number of PIM control
messages
View the information about
unacknowledged graft
messages
View the PIM information on an
interface or all interfaces
View the information of
join/prune messages to send
View PIM neighboring
information
View the content of the PIM
routing table
View the RP information
Reset PIM control message
counters

PIM Configuration Examples

PIM-DM Configuration Example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire PIM domain operates in the dense mode.
Host A and Host C are multicast receivers in two stub networks.
Switch D connects to the network that comprises the multicast source (Source) through
VLAN-interface 300.
Switch A connects to stub network N1 through VLAN-interface 100, and to Switch D through
VLAN-interface 103.
Switch B and Switch C connect to stub network N2 through their respective VLAN-interface 200,
and to Switch D through VLAN-interface 101 and VLAN-interface 102 respectively.
IGMPv2 is to run between Switch A and N1, and between Switch B/Switch C and N2.
Use the command...
display pim control-message counters
[ message-type { probe | register |
register-stop } | [ interface interface-type
interface-number | message-type { assert | bsr |
crp | graft | graft-ack | hello | join-prune |
state-refresh } ] * ]
display pim grafts
display pim interface [ interface-type
interface-number ] [ verbose ]
display pim join-prune mode { sm [ flags
flag-value ] | ssm } [ interface interface-type
interface-number | neighbor neighbor-address ] *
[ verbose ]
display pim neighbor [ interface interface-type
interface-number | neighbor-address | verbose ] *
display pim routing-table [ group-address [ mask
{ mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | incoming-interface
[ interface-type interface-number | register ] |
outgoing-interface { include | exclude | match }
{ interface-type interface-number | register } |
mode mode-type | flags flag-value | fsm ] *
display pim rp-info [ group-address ]
reset pim control-message counters [ interface
interface-type interface-number ]
1-36
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
user view