Displaying And Maintaining 802.1X; 802.1X Configuration Example - HP 4800G Series Configuration Manual

Configuration procedure
Follow these steps to configure a port-based guest VLAN:
To do...
Enter system view
Configure the
guest VLAN
for specified
or all ports
Different ports can be configured with different guest VLANs, but a port can be configured with only
one guest VLAN.
You cannot configure both the guest VLAN function and the free IP function in EAD fast
deployment.
If the data flows from a user-side device carry VLAN tags, and 802.1X and guest VLAN are enabled on
the access port, you are recommended to configure different VLAN IDs for the voice VLAN, the default
port VLAN, and the guest VLAN of 802.1X.

Displaying and Maintaining 802.1X

To do...
Display 802.1X session
information, statistics, or
configuration information of
specified or all ports
Clear 802.1X statistics

802.1X Configuration Example

Network requirements
The access control method of macbased is required on the port GigabitEthernet 1/0/1 to control
clients.
Use the command...
system-view
In system
dot1x guest-vlan guest-vlan-id
view [ interface interface-list ]
interface interface-type
In Ethernet
interface-number
interface view
dot1x guest-vlan vlan-id
Use the command...
display dot1x [ sessions |
statistics ] [ interface
interface-list ]
reset dot1x statistics
[ interface interface-list ]
1-15
Remarks
—
Required
Use either approach.
By default, a port is configured
with no guest VLAN.
Remarks
Available in any view
Available in user view